SAPOTA
(Manilkara zapota)

 

A tree of sapota
 

 

Family: Sapotaceae

Synonyms: Achras sapota

Other names: Sapodilla, sapote

 

Sapota, popularly known in India as chiku, is native to tropical America Most probably to south Mexico or Central America.  This plant is also grown for its Latex. 

            Chicle and gutta parcha are extracted from its latex. These are used as a base material in chewing gum and in some other industrial products. 

Leaves of a sapota tree

            In India it is cultivated for fruits which are liked all over the country.  The fruit is a fleshy berry, variable in shape, size and weight (75-150g).  The skin is thin, rusty brown somewhat scurfy looking like Irish potato, and the pulp soft, melting, crumbling with a sandy or granular texture with 1-5 hard, black seeds.  The fruit is a good source of digestible sugar (12-18%) and an appreciable source of protein, fat fibre ad minerals, Calcium and Iron.  It has become a very popular fruit crop in Gujarat, Maharashtra, Karnataka, Tamilnadu, Andhra Pradesh and Kerala. 

Climate and soil

Sapota, a crop of tropical region, needs warm (10-38 C) and humid (70 % relative humidity) climate where it flowers and fruits throughout the year.  However, if taken to subtropics or to places of  higher elevation like in Punjab and Haryana, it gives only one crop from summer flowering in April and May.  Under moisture stress also, it produces one crop only. 

Sapota fruits

Varieties

There are about 41 varieties spread all over the country.  However, commercially sapota industry is based on a few varieties and in some areas it is only monoculture like Kalipatte in Gujarat and Maharashtra.  Distribution of cultivars in India according to region is given in table 1.

Table1. Distribution of sapota cultivars in India 

State

Cultivars

Andhra Pradesh

 

Gujarat

 

Maharashtra

 

 

Karnataka

 

Tamil Nadu

 

Others

Pala, Kirtibarthi, Cricket Ball, Dwarapudi and Guthi

 

Jonavalasa

 

Kalipatti, Bhuripatti, Pilipatti, Dhola Diwani, Jhaumakhia and Cricket Ball

 

Kalipatti, Cricket Ball and Murraba

 

Kalipatti, Cricket Ball, Kirtibarthi, DHS1and DHS2

 

Guthi, Kirtibarthi, Pala, Co1, Co2 and PKM1

 Cricket Ball, Calcutta Special, Round, Oval and Baramasi

 

 Propagation and rootstocks

Sapota is propagated through seed, which has been the basis of its variability in India.  But inarching, using Manilkara hexandra (called khirni or rayan in India) as a rootstock, is used in India.  Air layering and softwood cuttings, using IBA (2,000ppm) treatment are also successful methods for sapota propagation.  But plants which are raised through air layering or cuttings establish poorly and are vulnerable to wind damage.  But still in Indian West Coast, air layering is more common and such plants also do not perform bad in shallow soils of that region.  For air layering, 1-2years old, 45-60 cm, long juvenile matures shoots of pencil thickness with plenty of healthy dark green leaves are selected.  On the base of such shoots, a ring of bark (2.5-3cm wide) is removed on which IBA+NNA (10,000ppm) each in lanolin paste is applied, covered with rooting media like sphagnum moss, vermiculite or garden soil and wrapped with plastic.  The roots emerge in 1-3 months and then layers are slowly separated from the mother tree and established in nursery.  They are planted in the next season.
 

Cut sapota fruits
 

            Sapota on rayan roots is the best combination in respect of plant vigour, productivity and longevity.  Propagation of sapota by inarching using rayan as rootstock is the most accepted method of its commercial cultivation.  Two years old potted rayan plants with pencil thickness are utilized and grafting is done in December-January.  The plants are ready for separation in June –July of following year.  This method is tedious, cumbersome and time consuming.  Softwood grafting using rayan as rootstock gives 93% success in situ.  It is an economically viable, faster, efficient and best technique.   July-August is ideal time for it. 

Cultivation

Planting

Since sapota is a crop of warm and humid tropics, it can be planted in any season provided irrigation facilities are available.  But it is beneficial to plant the grafts in beginning of the rainy season.  In areas having heavy rainfall, it can be planted in September.  In light soils pits of 60 cm x  60 cm x 60 cm size, whereas in heavy and gravely soils pits of 100 cm x 100 cm x 100 cm size are made in April May and exposed to sun for 15days.  Top 30cm soil is mixed with equal quantity of well rotten compost or farmyard manure, 3kg super phosphate and 1.5kg muriate of potash are used for pit filling.  To begin with all sides and bottom of the pit are dusted with 5% BHC dust and pits mixture is added to fill the pit and remaining vacant space is filled with remaining soil to height of 15cm above soil surface.  Such pits are left to monsoon rains for settling and then planting is done at appropriate time.  At the time of planting, a small hole sufficient to accommodate the ball of soil and roots of grafts is made in the centre of the pit and planted with scion in the direction of heavy wind to avoid damage to joint.  After planting soil around the plant is gently and firmly pressed and stakes are provided to avoid sun heat.  The plants are then lightly watered.  Young plants should also be protected against sunscald by providing dry grass thatch on top ad three sides excepting the south-east for sunlight.  Such well cared plants establish fast. 

            Since sapota tree makes uniform all round growth, square system of planting is recommended.  However, in lands with 5-15 % slope, contour planting is recommended. Depending on growth habit, sapota orchards are planted at 10x 10cm but being slower in growth, it takes longer period to occupy allotted space.  Therefore, high density plantations having 5 m x 5 m spacing up to the age of 13 years are very remunerative.  Thereafter yields begin to decline.

Training and pruning

            A seedlings tree grows excellently giving a shape of an umbrella.   However, plants raised through inarching require training for appropriate shape and frame work development.  No definite system of training has been developed for sapota.  Most trees are trained in central leader system.

            Sapota being an evergreen tree requires no regular pruning but regulation of vegetative growth to improve productivity and quality of fruits is necessary.  At times thinning of branches is affected in old plantation.  Pruning in sapota is confined to open the tree to light, and removal of dead and diseased branches. 

Manuring and fertilization

            Owing to evergreen nature of the plant, any inadequacy in its nutrition leads to sub optimal yield.  Deficiency of N leads to allowing of leaves from margin to mid rib.  The P deficient plants have purplish flecks on lamina with rusty pigmentation all over and inadequacy of K is marked by development of chlorotic symptoms long leaf margins which become dark grey in advanced stage.  Zinc deficiency is marked by small and erect leaves, short internodes and defoliation of terminals, whereas in calcareous soils iron deficiency causes general yellowing of leaves with premature shedding. 

      A dose of 50kg farmyard manure, 1,000 g N, 500 g P2O5 and 500 g K2O/tree/ year is optimum.  This quantity can be regulated on the basis of age of tree and status of nutrients in soil especially of P and K.  under rainfed conditions, dose of N should be raised to1.5 kg/tree.  Castor cake is beneficial for high quality fruits.  The nutrient doses prevalent in the country are given in Table 2.

Table2. Fertilizer doses for sapota (per tree)

State

Farmyard manure

N(g)

P2 O5

(g)

K2O

(g)

Andhra Pradesh

Assam

Gujarat

Karnataka

Kerala

Madhya Pradesh

Maharashtra

Orissa

Tamil Nadu  

50.00

1.25kg bone meal +8kg caster cake

50.00

50.00

55.00

50.00

30.00

15.00+200g Stera meal

50:50

400

 

900

400

500

500

 

500

45

 

750

160

 

450

160

360

250

 

-

150

 

640

450

 

450

450

750

125

 

-

-

 

1,200

 

            Under rainfed condition, fertilizers should be applied before the onset of monsoon.  However, under irrigated conditions it should be applied in 2 splits.  Total quantity of organic manure and half of chemical fertilizers should be applied at the beginning of monsoon and remaining half in the post-monsoon period (September-October).  Since 90% of active roots are distributed within drip up to a depth of 30cm, nutrients should be applied under tree canopy and mixed thoroughly in soil up to a depth of 15 cm.  In Zinc and Iron deficiency, the requirement should be met through application of organic manures and spraying of ZnSO4 and FeSO4 (0.5 %).

Aftercare

            Depending on growth habit of sapota tree, a planting distance of 10 m x 10 m is ideal.  Being a slow grower, it takes longer to occupy allotted space.  Therefore, intercropping is imperative.  Intercropping banana, papaya, pineapple and coca; French bean, tomato, brinjal, cabbage, cauliflower and cucurbits is recommended depending on climate and water resources.  In established orchards, pre-monsoon  and post –monsoon inter cultivation is recommended for better aeration and effective weed control.  In young orchards, weed hazard is common.  Use of 2 kg Bromacil + 2 kg Diuron/ha as pre-emergence spray is effective for a period of 10-12 months.  Mixed plantation with mango and guava should be avoided to reduce the problem of fruit fly. 

Irrigation

Habit of tree and its vegetative growth demand continuous supply of water.  But sapota is grown both under irrigated and non–irrigated conditions. Sapota requires irrigation at 30 days in summer.  Adoption of drip irrigation system is also beneficial, saving 40 % water with 70-75% higher net income.  This system should be laid out with 2 drippers spaced 50 cm from tree during initial 2 years and 4 drippers at 1m from tree until 5 years of age.  With dripper discharge rate of 4litres /hr, the system should be operated for 4hr during winter and 7hr during summer on alternate days.  Under short supply of water, timing could be 3hr and 30minutes in winter and 5hr and 40mintues in summer. 

Harvesting and post harvest management

Sapota takes about 7-101/2 months from anthesis to maturity of fruits depending on variety and climate.  Fruits follow double sigmoid pattern of growth.  Properly developed fruits have high TSS and sugar, and reduced acidity, astringency, latex and vitamin C.  Maturity is decided on the basis of ease with which brown scruff gets off the fruit surface and development of yellowish tinge intermixed wit corky brown color on the surface of the fruit.  At this stage, practically no green tissue and milky latex are seen on fruits when scratched with nails.  The fruits are hand picked or harvested with special harvester which has a round ring with a net bag fixed onto a long bamboo.  Depending on management level, 15-20 tons fruits are harvested from a hectare.

            Since sapota is a climacteric fruit, it has to be ripening artificially.  Fruits are highly perishable and they undergo rapid ripening changes within 5-7days during which the fruits become soft, sweet and develop excellent aroma with decline in tannins, latex sapotin, aldehydes and acidity.  These changes are associated with increase in production of ethylene, rate of respiration, catalase, peroxidase and PME activities.  These changes can be regulated through chemicals, temperature and storage gas composition. 

            Harvested fruits should be cleaned of latex and scurf by washing in clean water to make them look attractive. Such fruits should be graded into big, medium and small sizes.  Fruits should be tightly packed in cardboard boxes of 10 kg capacity with rice straw as padding material and with ethylene absorbents and transported quickly to wholesale markets.  For extending shelf life and to avoid storage rots, fruits can be dipped in GA300 ppm + bavistin 1,000ppm solution at pre-packing stage.  For uniform and rapid ripening ethephon (1,000ppm) can be utilized at 20`-25`C.  Modified storage with 5-10 % (c/c) CO2 can be employed for long storage (21-25days).  Refrigerated vans (12-23`C) should be utilized for long distance and export markets. 

Physiological disorders

Wilt or die back is common where sapota cultivation is being extended to traditionally rice growing regions.  Due to anaerobic conditions in monsoon and post monsoon season in such areas wilt is of common appearance aggravated by Fusarium spp.  This can be controlled by effective drainage facility before planting. 

            The shape of fruit is related with number if seeds init which depend on conditions for pollination at anthesis.  High temperature and rainfall during flowering cause oblongation of fruits.  Therefore, cultivation of sapota in areas with extreme summer temperature should be avoided. 

            Sometimes fruits do not develop into their normal shape but develop a depression or furrow towards the calyx end.  This symptom usually appears immediately after heavy rainfall and is aggravated by high intensity of irrigation.  Therefore over irrigation should be avoided. 

            The fruits exposed to intense sunlight do not ripen uniformly, developing corkiness during winter.  This is probably due to killing of hydrolyzing enzymes by alternation moisture accumulation and heating of fruit surface in winter.  Thus its trees need to grow vigorously. 

  

INPUT FROM

Dr. B.S. Chundawat
Ex-Vice Chancellor
Gujarat Agricultural Univerity
Anand, Gujrat, 388001
INDIA

 

Home Index of fruits Submit article News/Announcements